4x100 56.1 cb to 57.1 cb 20mm wheel spacers and bolts for Mini to VW

4x100 56.1 cb to 57.1 cb 20mm wheel spacers and bolts for Mini to VW
4x100 56.1 cb to 57.1 cb 20mm wheel spacers and bolts for Mini to VW
4x100 56.1 cb to 57.1 cb 20mm wheel spacers and bolts for Mini to VW

4x100 56.1 cb to 57.1 cb 20mm wheel spacers and bolts for Mini to VW

These suit Mini's up to 2006 with M12 wheel bolts. Mini's from 2006 onwards need M14 bolts.

Spacers are 20mm wide giving 40mm overall increase across both axles. All our custom-made spacers and adapters are manufactured from 6082 T6 Solid billet Aluminium and machined by our skilled Engineers at our Barnsley HQ. One of the most cost-effective mods on the market and easy to fit in 7 steps. Simply unbolt your wheel and remove.

Wire brush and wipe the bore and wheel hub clean, (must be dirt/rust free). Apply a little copper grease or similar to stop the faces sticking together. Slide the spacer on to your existing hub. Check the spacer is sitting flush against the original hub with no visible gap. Gently position the wheel on to the spacer spigot taking care not to damage the machined surfaces.

Secure the wheel with the extended bolts and torque them to the required spec. Watfields Precision Engineering also manufacture custom parts as well as wheel spacers and adapters. All our wheel spacers are manufactured from material sourced in the UK and are produced by Watfields Precision Engineering UK LTD.


4x100 56.1 cb to 57.1 cb 20mm wheel spacers and bolts for Mini to VW


Wheel Spacer Rear    Archives    Contact    Privacy Policy    Service Agreement