5x114.3 PCD spigot adapters 8mm Wide 67.1CB to 73.1CB QUANTITY 4

5x114.3 PCD spigot adapters 8mm Wide 67.1CB to 73.1CB QUANTITY 4

5x114.3 PCD spigot adapters 8mm Wide 67.1CB to 73.1CB QUANTITY 4

THESE SPIGOT ADAPTERS ARE PERFECT FOR ADDING CLEARANCE TO BRAKE AND SUSPENSION UPGRADES AND ALSO CHANGING THE WHEEL BORE WITHOUT THE USE OF PLASTIC SPIGOT RINGS. SHIM FITMENT IS FOR MITSUBISHI EVO TO AFTERMARKET 5X114.3 WHEELS.

PLEASE CHECK YOUR VEHICLE FITMENT BEFORE PURCHASING. Spacers are 8mm wide giving 16mm overall increase across the axles. These spacers are designed to fit a 67.1mm HUB and 73.1 wheel bore.

MACHINED IN HOUSE AT OUR BARNSLEY HQ FROM 6082 T6 BILLET ALUMINIUM. One of the most cost-effective mods on the market and easy to fit in 7 steps.

Simply unbolt your wheel and remove. Wire brush and wipe the bore and wheel hub clean, (must be dirt/rust free). Apply a little copper grease or similar to stop the faces sticking together.

Slide the spacer on to your existing hub. Check the spacer is sitting flush against the original hub with no visible gap. Gently position the wheel on to the spacer spigot taking care not to damage the machined surfaces. Secure the wheel with the extended bolts and torque them to the required spec. Watfields Precision Engineering also manufacture custom parts as well as wheel spacers and adapters.

All our wheel spacers are manufactured from material sourced in the UK and are produced by Watfields Precision Engineering UK LTD.


5x114.3 PCD spigot adapters 8mm Wide 67.1CB to 73.1CB QUANTITY 4


Wheel Spacer Rear    Archives    Contact    Privacy Policy    Service Agreement